OmniTek Ultra XR, User Manual

Page: 37 / 184

Ultra XR User Guide 2–13 XR-56-201 5
Vie
w
er
Zoom View Tile
Zoom View Description
The
Zoom View
tile provides a detailed
view of a 15 x 15 or 31 x 31 area of
centred about the current picture cursor
position.
The data shown comprises the Y, U and V values of the selected pixel (in the currently selected format)
and its X, Y position relative to the top left-hand corner of the Active Picture (also picked out for the
current cursor position on the Active Picture cursor rose).
The corresponding pixel data on the different data streams that contribute to these pixels can be seen
in the Data View and in the Data Waveform .
See the "Data View Tile" section for and the "Data Waveform Tile" sections for details.
Zoom View Controls
When the
Zoom View
tile is selected, the following buttons are available:
31 x 31
this select the 31 x 31 pixel array
15 x 15
this select the 15 x 15 pixel array
Format
this toggles the displayed values through decimal, hexadecimal and hex 8/2.
The Zoom View tile allows the image on the currently selected analyser input to be zoomed into either
a 15 x 15 or 31 x 31 pixel array about the current picture cursor position.
Also included in the display is a set of details about the pixel currently under the mouse pointer (where
this is over the zoomed image) or if the mouse pointer isn’t on the zoomed image, about the pixel at
the current cursor position.
See the "Active Cursors & SMPTE Cursors Control Panels" section for different ways in which
to control the cursor.