OmniTek Ultra XR, User Manual

Page: 109 / 184

Ultra XR User Guide 4–17 XR-56-201 5
Con
figur
ation
Ancillary
Menu Overview
The
Ancillary
menu determines how the Ultra system responds to ancillary packets that are present on
the SDI input signal.
ANC User Section
The "ANC User" section of the
Ancillary menu is used to define
up to 3 custom ANC packets.
These will appear as
User 1
,
User
2
and
User 3
in the
ANC Watch
window.
The information that you need to give for each packet is a Name (simply to identify it by) plus its Data
ID (or DID) and its Secondary Data ID (or SDID), both of which are included within the packet definition.
If it is appropriate to use one User definition to cover several related ANC Packet types, the DID and
SDID Masks may be used to pick out ANC Packet types with similar DIDs and SDIDs. Alternatively, if you
want the User definition to only pick out ANC Packets with the DID and SDID given, leave the Masks set
to FF.
As described above, before setting up any User ANC Packet types, you are strongly recommended
to run a sample video containing these packets through with just the supplied ANC Packet types to
confirm that the packets you are seeking to identify are not picked out as any of the supplied Packet
types because the packets will continue to be picked out as the supplied Packet type after you have
defined your User ANC Packet type.