Olivetti d-Color MF920, Operation Manual

Page: 66 / 248

Printing information pages
See “Printing menu settings pages” on page 30 and “Printing a network setup page” on page 30 for more information
on printing these pages.
Printing a font sample list
To print samples of the fonts currently available for your printer:
1
Make sure the printer is on and
Ready
appears.
2
From the printer control panel, press .
3
Press the arrow buttons until
Reports
appears, and then press .
4
Press the arrow buttons until
Print Fonts
appears, and then press .
5
Press the arrow buttons until
PCL Fonts
,
PostScript Fonts
, or
PPDS Fonts
appears, and then press
.
After the font sample list prints,
Ready
appears.
Printing a directory list
A directory list shows the resources stored in flash memory or on the hard disk.
1
Make sure the printer is on and
Ready
appears.
2
From the printer control panel, press .
3
Press the arrow buttons until
Reports
appears, and then press .
4
Press the arrow buttons until
Print Directory
appears, and then press .
After the directory list prints,
Ready
appears.
Printing the print quality test pages
Print the print quality test pages to isolate print quality problems.
1
Turn the printer off.
2
Hold down and the right arrow button while turning the printer on.
3
Release the buttons when the dots appear, and wait for
CONFIG MENU
to appear.
4
Press the arrow buttons until
PRINT_QUAL_TXT
appears, and then press .
The print quality test pages print.
5
Press the arrow buttons until
Exit Config Menu
appears, and then press .
Resetting the Printer
appears briefly, and then
Ready
appears.
Printing
66