Placing separator sheets between copies
1
Type the printer IP address into the address field of your Web browser.
Note:
If you do not know the IP address of the printer, then print a network setup page and locate the address
in the TCP/IP section.
2
Click
Settings
.
3
Click
Copy Settings
.
4
Click
Separator Sheets
.
Note:
Collation must be On for the separator sheets to be placed between copies. If Collation is Off, then the
separator sheets are added to the end of the print job.
5
Select one of the following:
•
Between pages
•
Between copies
•
Between jobs
6
Click
Submit
.
Copying multiple pages onto a single sheet
In order to save paper, you can copy either two or four consecutive pages of a multiple-page document onto a single
sheet of paper.
Notes:
•
The Paper Size must be set to Letter, Legal, A4, or B5 JIS.
•
The Copy Size must be set to 100%.
1
Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note:
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, then adjust the paper guides.
3
From the printer control panel, press the
Copy
button.
4
From the Copy area, press the
Options
button.
5
Press the arrow buttons until
Paper Saver
appears, and then press
.
6
Select the output you want.
For example, if you have four portrait-oriented original documents that you want copied to the same side of one
sheet, stop at
4 on 1 Portrait
, and then press
.
7
Press
for a black only copy or
for a color copy.
8
If you placed the document on the scanner glass and have additional pages to copy, then place the next page
on the scanner glass, and then press
1
on the numeric keypad. Otherwise, press
2
on the numeric keypad.
Copying
75
Summary of Contents for d-Color MF920
