Olivetti d-Color MF920, Operation Manual

Page: 219 / 248

R
EPEATING MARKS OCCUR MULTIPLE TIMES ON A PAGE
Print the Print defects guide and match the defects to the marks on one of the vertical lines. Follow the instructions
on the Print defects guide to determine the cause of the repeating defects.
Skewed print
C
HECK THE PAPER GUIDES
Move the guides in the tray to the correct positions for the paper size loaded.
C
HECK THE PAPER
Make sure you are using paper that meets the printer specifications.
Print is too light
These are possible solutions. Try one or more of the following:
C
ALIBRATE THE COLOR
The printer automatically calibrates the colors whenever a new imaging kit is detected. If a cartridge is replaced,
then you can calibrate the colors manually:
1
From the printer control panel, press .
2
From the
Admin menu
, press the arrow buttons until
Settings
appears, and then press .
3
Press the arrow buttons until
Print menu
appears, and then press .
4
Press the arrow buttons until
Quality menu
appears, and then press .
5
Press the arrow buttons until
Color Adjust
appears, and then press .
Calibrating
appears.
C
HECK THE DARKNESS
,
BRIGHTNESS
,
AND CONTRAST SETTINGS
The Toner Darkness setting is too light, the RGB Brightness setting is too light, or the RGB Contrast setting is too
low.
1
From the printer control panel, press .
2
From the
Admin menu
, press the arrow buttons until
Settings
appears, and then press .
Troubleshooting
219