10. Service Mode
Field Service Ver. 1.0 Jun. 2008
254
Adjustment / Setting
10.6.3
Jam
10.6.4
Service Call Counter
10.6.5
Warning
10.6.6
Maintenance
10.6.7
Service Total
A. Total
Functions
• To check the number of misfeeds that have occurred at different locations in the
machine.
• To clear the count of each counter.
Use
• To check the number of paper misfeeds that have occurred.
Functions
• To check the number of malfunctions that have occurred at different locations in the
machine.
• To clear the count of each counter.
Use
• To check the number of malfunctions that have occurred.
Functions
• To check the number of warning conditions detected according to the warming type
• To clear the count of each counter.
Use
• To check the number of warning conditions that have been detected.
Setting/
Procedure
• When a warning condition occurs, an oil mark appears at the lower left corner of the
basic screen.
• Touching the maintenance key will display the warning code screen.
Functions
• To set a count value for maintenance of any given part.
Use
• When any given part is replaced.
Setting/
Procedure
Maint.-Set
• Enter the maintenance counter value from the 10-key pad.
• The default setting is “0.”
0 to 999999
Maint.-Count
• Counts up when a sheet of paper is fed through the machine.
• A warning message appears if the count reaches a preset value.
Functions
• To display the count value for the service total counter.
Use
• Use to check the total No. of printed pages including the ones printed by the Service
Mode.
Setting/
Procedure
Service Total
: No. of pages printed by user mode and Service Mode.
Service Total (Duplex) : No. of pages printed by user mode and Service Mode in
duplex.
d-Color MF201
Service Manual Y109660-1
