Olivetti d-Color MF201 plus Service Manual Download Page 122

Page: 122 / 396

Field Service Ver. 1.0 Jun. 2008

6. Other

107

Maintenance

6.4

Cleaning procedure

NOTE
• The alcohol described in the cleaning procedure represents the ethanol isopropyl

alcohol.

6.4.1

Transfer belt unit

Remove the transfer belt unit.

See P.24

Using a cleaning pad, wipe the trans-
fer belt [1].

NOTE
• Do not wipe out with water.
• Do not wipe out with any solvents.

6.4.2

PH window Y,M,C,K

Open the front door.

Remove the PH window cleaning jig
[1] from the front door.

Insert the PH window cleaning jig [1]
to the cleaning port [2] and clean it
by putting the jig back and forth a
couple times.

NOTE
• Clean every PH window of Y,M,C,K.

A02EF2C207DA

[1]

A02EF2C502DA

[1]

A02EF2C503DA

[2]

[1]

-Color

201

Y109660-1 Sevice Manual

Summary of Contents for d-Color MF201 plus












































































































































































































































































































































































































Search results

Summary of Contents for d-Color MF201 plus

Reviews:

Related manuals for d-Color MF201 plus

Brands by name

Popular brands

Olivetti d-Color MF201 plus, Service Manual

Search results

Summary of Contents for d-Color MF201 plus

Reviews:

Related manuals for d-Color MF201 plus

Brands by name

Popular brands