Field Service Ver. 1.0 Jun. 2008
10. Service Mode
161
Adjustment / Setting
10.3.5
Printer Resist Loop
Functions
• To set the correction value of the paper loop length for each process speed of tray 1,
tray 2 to tray 4 / LCT, bypass, and duplex.
• To adjust the length of the loop formed in paper before the registration rollers.
• Use “Paper Passage” for paper passage check.
Use
When a paper skew occurs.
When a paper misfeed occurs.
Adjustment
Instructions
To decrease the loop amount: Decrease the setting value
To increase the loop amount: Increase the setting value
Adjustment
Range
• The adjustable range is different depending on paper source and processing speed.
Setting/
Procedure
1.
Call the Service Mode to the screen.
2.
Touch [Machine Adjustment]
o
[Printer Resist Loop].
3.
Select a paper source and a processing speed where the settings are made by
touching the corresponding keys.
4.
Enter the new setting from the [+] / [-] keys and touch [OK].
Tray 1
Tray 2/3/4 LCT
Manual
Duplex
92 mm/sec
-10 to +10
-10 to +10
-10 to +10
-10 to +10
46 mm/sec
-15 to +15
-15 to +15
-15 to +15
-8 to +8
d
-Color
M
F
201
Y109660-1 Sevice Manual
