3. Periodical check
Field Service Ver. 1.0 Jun. 2008
24
Maintenance
3.4.8
Replacing the transfer belt unit
A. Periodically replacing parts/cycle
• Transfer belt unit: Every 120,000 prints
NOTE
• Before replacement operations of the transfer belt unit, make sure to turn OFF the
main power switch and the sub power switch.
B. Removal procedure
1.
Turn OFF the main power switch and the sub power switch.
2.
Open the right door.
3.
Remove two screws [1] and release
the lock of the transfer belt unit [2].
4.
Hold the both sides and lift it to take
out the transfer belt unit [1] a little.
5.
Hold the position [1] as shown in the
left and remove the transfer belt unit
[2].
NOTE
• Do not touch the surface of the
Image transfer belt unit.
• Cover the image transfer belt unit
with something such shade cloth to
protect its surface from dust or for-
eign matter.
A02FF2C006DA
[1]
[2]
A02FF2C007DA
[1]
A02FF2C008DA
[1]
[1]
[2]
d-Color MF201
Service Manual Y109660-1