Olivetti d-Color MF201 plus, Service Manual

Page: 214 / 396

Field Service Ver. 1.0 Jun. 2008 10. Service Mode
199
Adjustment / Setting
NOTE
• For actually calling ports G3-1 and G3-2, see “Select PSTN port automatically
(MODE 043 Bit 1)”.
2 Disable SMTP reception
Enable Disable
Specify allowed or not
allowed for SMTP recep-
tion.
(for Internet fax(IP-TX),
SIPFAX, Internet fax (IP
relay) reception)
1 TSI information for SMTP reception
Specify whether to describe the machine
name (or IP address (or destination SIP-FAX
number for SIP-FAX) if none) of the TSI in
subject or to prioritize the IP address (or des-
tination SIP-FAX number for SIP-FAX) when
forwarding documents received by Internet
FAX (IP-TX) or SIP-FAX.
This setting is applied also for the priority
order of display of destination name informa-
tion of the RX activity report for Internet FAX
(IP-TX) reception, SIP-FAX reception, and IP
relay reception.
Machine
name pri-
ority
IIP
address
priority
Bit Setting item
Setting value
Description
0 1
Mode Default value
352
Bit 7654 3210
HEX: D0
State 1101 0000
Bit Setting item
Setting value
Description
0 1
7 Notification of result (Network function)
No Yes
Specify whether a com-
munication error message
is returned to the sender
when a communication
error occurs with code
E6xxxx when e-mail is
received.
6 Position for adding Gateway TSI
Outside
of docu-
ment
Inside of
document
Specify where to add the
TSI when forwarding
through gateway trans
mission (IP relay).
5 Specify whether to add TSI when forwarding
Not add Add
Specify whether to add
TSI when forwarding
received documents.
4 Position for adding TSI when forwarding Outside
of docu-
ment
Inside of
document
Select where to add the
TSI when forwarding
received documents.
d
-Color
M
F
201
Y109660-1 Sevice Manual