OHAUS T72XW AM, Instruction Manual

Page: 95 / 143

7000 SERIES INDICATORS EN 87
6. The ID, weight and variable information for the inbound transaction is now displayed for confirmation. If the
data is correct, press PRINT to generate the inbound transaction. If any of the data is not accurate, press the
CLEAR key to clear all data and return to the ID? prompt.
7. The vehicle weight, variable (if entered), time and date are now stored in the Temporary ID Table (by the ID)
and an inbound print is triggered. The Inbound transaction stays on screen for a duplicate print, if required.
Duplicate print capability is not available if the live weight on the scale deviates from the printed transaction weight
by more than 50 divisions.
8.
The display returns to its initial state after the duplicate ticket is printed, or when the weight changes more than
50 display divisions.
Outbound Transaction
1. The display will show Add weight > xxxx (i.e,. greater than xxxx) where xxxx is the threshold value entered in
setup.
2. A vehicle which has already been weighed in an inbound transaction pulls onto the scale and the weight
exceeds the threshold value.
3. When a no-motion condition is detected, the display will prompt ID?.
4. Enter the alphanumeric identification (ID) for this vehicle from the inbound transaction. If Auto ID is enabled, a
2-digit ID will automatically be assigned by the indicator. This ID must be overwritten with the ID from the
inbound transaction. The ID can also be recalled by viewing the records in the Temporary ID Table and
pressing ENTER when the desired record is displayed. When the ID entry is complete, press ENTER.
5. If the variable information was entered previously or if variable data is disabled, skip the next step.
6. If enabled in setup, the indicator will prompt for the variable entry. If so prompted, enter the variable
transaction data using the alphanumeric keys and press ENTER when complete. The variable is a descriptive,
printable field which is related to this specific vehicle or vehicle load.
7. The indicator will recall the weight stored during the inbound transaction and display it at the top of the display
as M = xxxxx. The display will change to the net mode. If net sign correction is enabled, the net weight will be
positive even if the inbound weight is larger than the outbound weight. If disabled, the net weight can be
negative.
8. The ID, weight and variable information for the outbound transaction is now displayed for confirmation. If the
data is correct, press PRINT to generate the outbound transaction. If any of the data is not accurate, press the
CLEAR key to clear all data and return to the ID? prompt.
9. The Temporary ID is cleared from the Temporary ID Table and an outbound print is triggered. The transaction
data stays on screen for a duplicate print, if required.
Duplicate print capability is not available if the live weight on the scale deviates from the printed transaction weight
by more than 50 divisions.
10. The display returns to its initial state after the duplicate ticket is printed, or when the weight changes more than
50 display divisions.
Viewing/Recalling a Temporary Tare Record
Instead of manually entering the ID for the outbound transaction, the ID can be recalled from the Temporary ID
Table.
1.
When the display is prompting for ID, press the MENU key.
2. Focus should be on the Temporary ID Table icon. If not, move the focus to that icon.
3. Press ENTER to view the first record in the table.
4. Use the UP and DOWN arrow keys to view all the records in the table.
5. When the desired record is displayed, press the ENTER key to recall that record.
6. The stored weight and variable (if used) will be recalled to the screen and the display will show the resulting
net weight.
7. Complete the transaction by pressing PRINT.
4.5.11 Permanent Tare Operation
Begin with the scale empty and the indicator in the Permanent Tare mode of the Vehicle Weighing application. The
Permanent Tare icon will be shown in the lower left corner. In this mode, the tare weight of the vehicle has already
been
“permanently” stored into the Permanent ID Table so the vehicle only passes over the scale one time.
Outbound Transaction
1. The display will show Add weight > xxxx (i.e, greater than xxxx) where xxxx is the threshold value entered in
setup.
2. A vehicle pulls onto the scale and the weight exceeds the threshold value.
www.
GlobalTestSupply
.com
Find Quality Products Online at: sales@GlobalTestSupply.com