OHAUS T72XW AM, Instruction Manual

Page: 57 / 143

7000 SERIES INDICATORS EN 49
Edit Counter
Use the Edit Counter selection box to Enable or Disable manual editing of the next transaction counter value.
Next Transaction
The value for the counter for the next transaction displays in the Next Transaction field. If Edit Counter is Enabled,
the counter can be manually preset to any valid number above 0.
User
The T72XW indicator supports password protection of the setup mode. All setup functions of the indicator will be
available to all users via the SETUP icon
in the Operator’s menu until password protection is enabled and a
password is entered.
Password Protection
If Disabled (default), all areas of the indicator (including the setup mode) can be entered normally. If Enabled, a
password code must be entered before access is granted to the setup mode.
Password
If password protection is enabled in the previous step, this parameter allows entry of the actual password for
access. A numeric entry up to six digits in length can be entered.
Confirm Password
Confirm the password previously entered. If the password does not agree, it will not be accepted.
Menu Keys
This screen permits the addition or removal of icons from the indicator's operator menu screen. Two icons,
INFORMATION RECALL and SETUP , are automatically placed in the menu and cannot be removed.
Access each field on this page to Enable or Disable each of the icons. The list includes:

Alibi Memory

Time and Date

Contrast Adjust

Totals Memory

Transaction Counter

Expand x10
Reset
To initiate a reset, press the ENTER
key. If the reset was successful, a verification message that reads “Reset
Successful” displays. If the reset was not successful, an error message that reads “Reset Failure” displays. If the
reset fails, try to initiate the reset again. If the reset continues to fail, contact a local OHAUS CORPORATION
representative for assistance.
Press the
LEFT navigation key to exit without resetting.
www.
GlobalTestSupply
.com
Find Quality Products Online at: sales@GlobalTestSupply.com