OHAUS T72XW AM, Instruction Manual

Page: 62 / 143

EN 54 7000 SERIES INDICATORS
Table 3-8: Ethernet Connection Assignments
Port
Assignment Template
Ethernet
Assignment
Demand Template 1, 2, 3, 4 - 9
Print Client
Reports
SICS
Assignment 2 (if Assignment = Demand or Reports)
Demand Template 1, 2, 3, 4 - 9
Reports
Assignment 3 (if Assignment 2 = Demand or Reports)
Demand Template 1, 2, 3, 4 - 9
Reports
Table 3-9: Print Client Connection Assignments
Port
Assignment Template Checksum
USB
Assignment
Continuous Output Disabled, Enabled
Continuous-Extended Disabled, Enabled
Demand Template 1, 2, 3, 4 - 9
Reports
Assignment 2 (if Assignment = Demand or Reports)
Demand Template 1, 2, 3, 4 - 9
Reports
Assignment 3 (if Assignment 2 = Demand or Reports)
Demand Template 1, 2, 3, 4 - 9
Reports
Connection options notes:
Not all choices are available for all connection assignments. Only valid choices are shown in the selection
boxes.
The Print Client assignment is available only for the Ethernet port. If selected as the Ethernet port assignment,
a Print Client port will be shown to select the connections for the Print Client.
The Template field displays only when the assignment selection is Demand Output.
The Checksum field is available for continuous outputs only.
The SICS selection provides some Level 0 and Level 1 interface commands.
If a Continuous or Demand assignment is made, that port automatically supports the CTPZ input command
capability. No selection is required. The Print Client port does NOT support CTPZ in this situation.
Serial
Serial communication setup screens provide access to the communication parameters for the serial ports COM1
and COM2/USB. The COM2 port and USB port share the same setup parameters as only one of them can be
installed into the indicator at one time.
The COM2 and USB ports are only shown if the corresponding option board has been installed.
COM1
www.
GlobalTestSupply
.com
Find Quality Products Online at: sales@GlobalTestSupply.com