OHAUS T72XW AM, Instruction Manual

Page: 36 / 143

EN 28 7000 SERIES INDICATORS
Figure 2-11: Checkweighing Application Screen
2.5.3 Counting
The Counting application offers the following capabilities:

Variable sample selection that allows a numeric sample quantity to be entered via the numeric keypad.

A prompt-based mode of operation.

Direct entry of an average piece weight, using the numeric keypad.

Accumulation by user-defined ID.
Figure 2-12: Counting Application Screen
2.5.4 Vehicle Weighing
The Vehicle Weighing application provides two special modes of operation
Temporary ID weighing
Permanent ID weighing
These modes support the various methods of storing, retrieving and printing weights from truck scales.
Each mode can be separately enabled in setup, so that either or both of them is available. In this case, pressing the
FUNCTION key enters the first enabled vehicle weighing mode. The next press of the FUNCTION key either
returns to normal weighing mode or (if the mode is enabled) enters the second vehicle weighing mode. From here,
a further press of the FUNCTION key will return to normal mode.
Once a Vehicle Weighing mode is selected, an icon representing the selected mode will appear in the lower left
corner of the display.
In addition to these two special modes, the indicator provides the ability to print gross weights, which are not
included in any of the special features of the modes above. This is done in the normal weighing mode, and is called
Quick Print.
Figure 2-15: Vehicle Weighing Application Screens
– Permanent ID (left) and Temporary ID (right)
www.
GlobalTestSupply
.com
Find Quality Products Online at: sales@GlobalTestSupply.com