OHAUS T72XW AM, Instruction Manual

Page: 118 / 143

EN 110 7000 SERIES INDICATORS
Version Number of the MT-SICS
Each level of the MT-SICS has its own version number, which can be requested with the command I1 from level 0.
This indicator supports:

MT-SICS level 0, version 2.2x (except the ZI command)

MT-SICS level 1, version 2.2x (except the D, DW and K commands)
Command Formats
Each command received by the indicator via the SICS interface is acknowledged by a response to the transmitting
device. Commands and responses are data strings with a fixed format. Commands sent to the indicator comprise
one or more characters of the ASCII character set. Commands must be in upper-case.
The parameters of the command must be separated from one another and from the command name by a space
(20xh), in the examples shown in this section, a space is represented as _ ).
Each command must be terminated by <CR><LF> (0Dxh, 0Axh).
The characters <CR> and <LF>, which can be input using the
ENTER or RETURN key of most PC indicator
keypads, are not shown in this description; however, it is essential they be included for communication with the
indicator.
Example
Command to tare the indicator:
“TA_20.00_lb” (The command terminators <CR>< LF> are not shown.)
Response Formats
All responses sent by the indicator to the transmitting device acknowledging the received commands have one of
the following formats:

Response with weight value

Response without weight value

Error message
Format of the Response with Weight Value
A general description of the response with weight value as follows:
ID
– Response identification.
__
– Space (20xh)
Status
– Status of the indicator. See description of the commands and responses.
www.
GlobalTestSupply
.com
Find Quality Products Online at: sales@GlobalTestSupply.com