OHAUS T72XW AM, Instruction Manual

Page: 54 / 143

EN 46 7000 SERIES INDICATORS
3.5.3 Indicator
A detailed view of the Indicator branch is shown in Figure 3-15. This view indicates all the parameters in the
Indicator branch. Each of these setup parameters are described in this section.
Figure 3-15: Indicator Branch Menu Structure
Device
The Device setup screen enables the entry of the indicator
’s serial number and the keypad timeout value.
Serial Number
Use the alphanumeric keys to enter the indicator
’s serial number. The serial number is located on the data label on
the back of the indicator. Press the ENTER key to accept the serial number entered.
Key Timing
Use the numeric keys to enter the timeout period, in 100 mS increments, for key-presses when making
alphanumeric data entry.
The value sets the amount of time that a letter shown on the display can be changed (e.g. from a to b to c) by
pressing the key again. Once the Key Timing value has elapsed, the selected letter is set and the next key press
will initiate a new character or digit entry.
Values between 3 and 12 are normal. The shorter the time, the faster an entry can occur. The default value is 8
.
Display
Use the Display setup screen to set the screensaver and backlight timeouts, the auto off timer, what appears in the
system line, to select the tare display and to adjust contrast of the display.
Screensaver
Select the number of minutes (1, 5, 10 or 30) that must elapse with no scale motion and no keypad activity before
the screensaver is shown (replaces the view on the display screen). If motion is detected or any key is pressed, the
screen saver automatically exits and its time is reset. A keystroke used to exit the screen saver mode is ignored for
all other purposes.
A setting of Disabled in the Screensaver field will disable the screensaver.
www.
GlobalTestSupply
.com
Find Quality Products Online at: sales@GlobalTestSupply.com