OHAUS T72XW AM, Instruction Manual

Page: 89 / 143

7000 SERIES INDICATORS EN 81
4.4.5 Print Format
When a demand print is triggered in the Counting application, the indicator will look for a demand connection to one
of the ports using template 9.
If such a connection exists, then template 9 will be sent out via the selected port.
If there is no demand connection using template 9, a “No demand connection” error will be displayed.
New Print Fields
Template 9 contains four new data fields related to the Counting application that are not available in the other
templates.
These new print fields are:

APW

Piece Count

Record ID (from ID Table)

Record Description (from ID Table)
Default Template
The default structure for template 9 is shown in Figure 4-12.
Elements in braces {…} are fields of data supplied by
the indicator.
Figure 4-13 shows a printed sample of the default template.
{String 1} {New line}
{String 2} {New line}
{Time} {3 spaces} {3 spaces} {Date} {New line}
{Displayed Weight} {New line}
{Piece Count} {New line}
{Record Description} {New line}
{End of template}
Figure 4-12: Default Structure of Template 9
Figure 4-13: Print Sample, Default Template 9
This template can be edited, as described in the Communication section of Chapter 3 of this manual, Configuration
> Communication > Templates.
Report Format
The ID Table Report can be configured as narrow (40 characters) or wide (80 characters) in setup at
Communication > Reports.
Figure 4-14 details the structure and contents of the ID Table Report in narrow format. Figure 4-15shows the same
information for the wide format report.
-- ID TABLE REPORT -- www.
GlobalTestSupply
.com
Find Quality Products Online at: sales@GlobalTestSupply.com