OHAUS T72XW AM, Instruction Manual

Page: 77 / 143

7000 SERIES INDICATORS EN 69
If the feature accessed by the key must be enabled or configured separately, such as the Target Table, enabling its
menu key will display the corresponding icon in the Operator Menu, but will not give access to the feature.
Active Target
By default, the Active Target is Enabled, so that the active target and tolerance values in use can be viewed by the
Operator. The Target Editing parameter at Operation > Target Editing determines which of the viewable fields can
be edited.
Quick Set Target
Disabled by default, Quick Set Target can be Enabled to permit the Operator to define a new target by placing
actual weights on the scale.
Target Table
Operator access to the Target Table can be Disabled (the default) or Enabled.
Target Values
Selecting Target Values opens a screen that displays the current target information. The appearance of this screen
will vary depending on the Tolerance Type selected under Operation:

If the Tolerance Type is set to Target Deviation or % of Target, the screen will include a target value together
with upper and lower tolerances, expressed either as a weight value or a percentage of the target, and the
Description field.

If the Tolerance Type is Weight Value, the Under Limit and Over Limit are displayed, together with the
Description field.
Each value is updated when focus leaves the entry box.
Note: Disabling all of the target menu keys will prohibit an operator from viewing or changing the target and
tolerance values. These values can still be entered and edited in setup at the Target Values page.
Target Table
The Target Table can store up to 25 target IDs, each with its own target and tolerance values together with a
description and (if Totalization is enabled) a total register and transaction counter. The target ID can be used for the
quick recall of a set of target parameters for Checkweighing.
Note: The first 10 records are stored in memory on the main board and are always available. An SD memory card
must be installed to store the remaining 15 records, giving a total of 25.
Target Table
The Target Table can be Enabled or Disabled (the default). If the table is Enabled, the Totalization and Clear Totals
parameters and the View Table option also appear on the screen. If the table is Disabled, the ID field in
Checkweighing will refer to the basic weighing ID.
Totalization
Totalization allows the indicator to track the total weight and number of transactions associated with an ID in the
target table.
Totalization can be Enabled or Disabled (the default). If it is Enabled, count and total weight values are
accumulated for each ID when a demand output with template 6 is generated.
Note: If any parameters of a recalled ID are changed while viewing the active record, the Totalization link will be
broken and accumulation will no longer occur.
Clear Totals
Clear Totals can be set to Disabled, Automatic or Manual (the default).
www.
GlobalTestSupply
.com
Find Quality Products Online at: sales@GlobalTestSupply.com