EN 64
7000 SERIES INDICATORS
The weight display will show dashes, and Line 1 will indicate Working and count down from the programmed
Sampling Time while the averaging cycle is in process.
When the cycle is complete, the averaged weight will be shown on the display, with an asterisk (*) to the left
indicating that it is not a live scale weight. Line 1 will indicate Cycle complete.
Press PRINT
to print the resulting average weight. The display will return to show the current weight on the
scale. If Auto Print is selected, the print will be triggered automatically after the programmed Print Delay time.
Remove the animals from the scale. When the weight returns to below 20d, Line 1 will return to the original prompt.
Mode 2 Operation
Begin with the scale empty and the indicator in the Animal/Dynamic weighing application.
1.
The display will prompt Number of animals?
2.
Press ZERO
to capture an accurate zero reference.
3.
Enter the number of animals to be placed on the scale and the press the
ENTER
key
.
4.
The display will show Press
ENTER
to start. or, if Auto Start is enabled, it will prompt Add weight > xxx (i.e.,
greater than xxx), where xxx is the programmed threshold weight.
5.
If required, a transactional ID may be entered via the ID key
. If programmed in setup, the ID will appear
on Line 2 at the bottom of the display.
6.
Add the number of animals entered in step 3 to the scale, then press the
ENTER
key
to start the weighing
cycle. If Auto Start is enabled, the cycle will start automatically when the weight on the scale exceeds the
programmed threshold and there is no motion on the scale.
7.
The weight display will show dashes, and Line 1 will indicate Working and a count down from the programmed
Sampling Time while the averaging cycle is in process.
8.
When the cycle is complete, the averaged weight will be shown on the display with an asterisk (*) to the left
indicating that it is not a live scale weight. Line 1 will indicate Cycle complete. If Line 2 has been programmed
to do so, it will show the average weight.
9.
Press PRINT
to print the resulting average weight. The display will return to an active weight display. If
Auto Print is selected, the print will be triggered automatically after the programmed hold time.
10. Remove the animals from the scale. When the weight returns to below 20d (display divisions), Line 1 will
return to the original prompt.
Aborting a Weighing Cycle
During the Animal/Dynamic weighing cycle, the process can be aborted at any time by pressing
CLEAR
. If
operating in the Auto-start mode, pressing the
CLEAR
key will revert to manual start for the next cycle.
4.2.5
Serial Input Commands
The Animal/Dynamic weighing application supports three new serial commands in addition to the standard ASCII
commands for a demand or continuous connection assignment. These commands are:
S
Starts the Animal/Dynamic weighing process.
xxQ
Enters a new quantity of animals value. “xx” can be any whole value from 01
to 99.
E
Ends the cycle, clears the display and returns focus to the first screen.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
Summary of Contents for T72XW AM
