OHAUS T72XW AM, Instruction Manual

Page: 121 / 143

7000 SERIES INDICATORS EN 113
I1
– INQUIRY OF MT-SICS LEVEL AND MT-SICS VERSIONS
Command: I1
Response:
I1_A_“ ”_“2.2x”_“2.2x”_“ ”_“ ”
“” No Levels fully implemented
2.2x
Level 0, version V2.2x
2.2x Level 1, version V2.2x
“” No MT-SICS 2 commands
“” No MT-SICS 3 commands
Response: I1_I Command understood, not executable at present.
Comments

For the MT-SICS level, only fully implemented levels are listed. In this case, neither level 0 nor level 1 were
fully implemented so the level is not specified.

In the case of the MT-SICS version, all levels are specified even those only partially implemented.
I2
– INQUIRY OF DATA
Command: I2
Response:
I2_A_“T72XW_Standard_50.00_kg”
T72XW Model number of indicator
Standard Standard functionality
50.00 kg Capacity and primary unit of the scale
Response: I2_I Command understood, not executable at present.
Comments
The number of characters in the “text” field depends on the scale capacity.
I3
– INQUIRY OF SW VERSION
Command: I3
Response:
I3_A_“1.00”
1.00 Firmware version of the indicator
Response: I3_I Command understood, not executable at present.
Comment
The number of characters of “text” depends on the revision level.
I4
– INQUIRY OF SERIAL NUMBER
Command: I4
Response:
I4_A_“123456”
123456 Serial number of indicator
Response: I4_I Command understood, not executable at present.
Comments
The serial number response is the content of the indicator serial number variable (#301) as entered in setup.
www.
GlobalTestSupply
.com
Find Quality Products Online at: sales@GlobalTestSupply.com