OHAUS T72XW AM, Instruction Manual

Page: 59 / 143

7000 SERIES INDICATORS EN 51
Table 3-2 lists the available items that can be selected for a field.
Table 3-2: Items Used in Templates
Item Length Item Length
3 spaces 3 String 2 40
10 spaces 10 String 3 40
15 spaces 15 String 4 40
Date 8 or 11 String 5 40
Displayed Weight 10 - 17 String 6 40
End of Template 0 String 7 40
Gross Weight 10 - 17 String 8 40
ID 20 String 9 40
Net Weight 12 - 17 Discrete I/O 40
New Line (<CR><LF>) 2 Tare Weight 12 - 17
Scale Name 20 Time 5 - 11
String 1 40 Transaction # 7
Refer to Appendix B, Default Settings, for more details on template structure and contents.
Output Templates 6 through 9
Each of the templates 6 through 9 is used for a specific application, as indicated in Table 3-3.
.
Table 3-4: Application Templates
Template Application
4 Vehicle
– Inbound
5 Vehicle - Outbound
6 Checkweighing
8 Animal/Dynamic
weighing
9 Counting
Each of the application templates is configured as described above, using the field number and item. Each
application also provides new application-specific items that can be added to a template. The additional items for
each template are listed in Chapter 4.
Add Line Feeds
On each template page is an entry box for entering the number of blank lines to be added at the end of the
template. This provides the ability to advance a ticket or label after printing. Enter a value from 0 to 9 for the
number of line feeds to be added after a template is transmitted.
Strings
The Template Strings setup screen defines up to 10 strings of characters that may be used in template messages.
Template strings can be viewed, edited or cleared.
To enter or edit template strings:
Select the string number in the first selection box then any existing data for that string will be shown in the second
entry box. Using the alphanumeric keys, enter or edit the characters to be used as the selected string.
Note that there is a new method of data entry called Decimal supported in Template Strings. The SHIFT key
now switches between numeric entry , upper case alpha entry , lower case alpha entry ,
and decimal entry . The decimal entry method can be used to enter specific characters not available via the
T72XW alphanumeric keypad by entering the decimal value of the ASCII character.
www.
GlobalTestSupply
.com
Find Quality Products Online at: sales@GlobalTestSupply.com