OHAUS T72XW AM, Instruction Manual

Page: 90 / 143

EN 82 7000 SERIES INDICATORS
12:27:43 15 Feb 2012
01 Blue cups 0.
0123 kg
0.
00 kg T 12 318 Pcs
***************************************
02 Red cups 0.
0357 kg
0.
00 kg T 8 285 Pcs
***************************************
03 Green cups 0.
03466 kg
0.
00 kg T 18 623 Pcs
***************************************
Figure 4-14: Example of Printed ID Table Report, Narrow Format
-- ID TABLE REPORT --
12:27:43 15 Oct 2010
01 Blue cups 0.
0123 kg 0.
00 kg T 12 318 Pcs
**********************************************************************************
02 Red cups 0.
0357 kg 1.
23 kg T 8 285 Pcs
**********************************************************************************
03 Green cups 0.
03466 kg 12.
5 kg T 18 623 Pcs
**********************************************************************************
Figure 4-15: Example of Printed ID Table Report, Wide Format
4.5 Vehicle Weighing
Note: An SD memory card must be installed in the indicator in order to run the Vehicle Weighing Application.
4.5.1 Overview
The T72XW Vehicle Weighing application provides two modes of operation to support Temporary Tare and
Permanent Tare storing, retrieving and printing.
An icon at the lower left corner of the display indicates which of the two modes is active:
Temporary Tare Weighing
Permanent Tare Weighing
Either or both of these modes can be enabled in setup. If both modes are enabled, pressing FUNCTION once puts
the indicator in Temporary Tare weighing mode and the temporary tare icon will be shown in the lower left corner of
the display. A second press accesses Permanent Tare weighing and the Permanent Tare icon will be shown. After
the last enabled mode is displayed, the next press of the FUNCTION key returns the indicator to the basic weighing
mode.
The printing of vehicle weights without use of the storage/recall process is supported in the basic weighing mode.
This is sometimes called Quick Print or Transient print, which simply prints gross vehicle weights.
4.5.2 Temporary Tare Weighing
Temporary Tare functionality is a two-pass mode that uses the Temporary ID table to store the weight from an
inbound transaction. If required, the indicator can automatically assign a temporary two-digit ID. Alternatively, the
ID can be assigned manually.
When the vehicle returns to the scale for the outbound transaction, the system recalls the previously stored weight
associated with the vehicle’s ID, and the vehicle’s net weight calculated. Once the outbound ticket is printed, the
Temporary Tare record is cleared from the table.
www.
GlobalTestSupply
.com
Find Quality Products Online at: sales@GlobalTestSupply.com