Oce CS9350, Manual

Page: 113 / 194

CS9350 OPERATION MANUAL
5-113
(5) Micro Adj.Change menu
Sets up Micro Adjustment Change.
Pre-heater menu
Sets the temperature of the pre-heater.
Set to curb a rapid temperature change at the printing portion by pre-heating the media before printing.
NOTE

The set temperature of the pre-heater differs depending on the media.
For the set temperatures of the pre-heater, refer to “recommended media list”.
Setup item Setting Description
Micro Adj.Change -5.00%~<0.00>~5.00% Sets up Micro Adjustment Change.
— •[Enter] key: saves the setting and shifts to the previous menu.
•[Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu
Setup item Setting Description
Pre heater Off / <30 °C> to 50 °C Sets the temperature of the pre-heater.
1.Roll media
2.Pre heater
3.Print head
— •[Enter] key: saves the setting and shifts to the previous menu.
•[Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.1.1 User Type menu
2 3
1