Oce CS9350, Manual

Page: 141 / 194

CS9350 User’s Guide
6-141
Chapter 6 Maintenance
6.1 Replacing consumable components
6.1.1 Replacing ink cartridges
(1) Replacement time
a. When “[****] Ink Low” is displayed on the operation panel

This message is displayed when there is a small amount of ink remaining in the ink
cartridge.

The alarm buzzer sounds. To stop the buzzer, press the [Enter] key on the operation
panel.

Replace with the new ink cartridge.
b. When “[****] Ink End” is displayed on the operation panel

This message is displayed when there is no ink remaining in the ink cartridge.

The alarm buzzer sounds. To stop the buzzer, press the [Enter] key on the operation
panel.

Immediately replace it with the new ink cartridge.
NOTE

[****] in the messages for ink cartridge replacement indicates the color that is almost
empty or runs out, using the following characters.

K: Black

C: Cyan

M: Magenta

Y: Yellow

Do not insert or remove the ink cartridge except at the time of replacement. Inserting or
removing the ink cartridge mixes air into the ink tube, and failures such as nozzle
clogging trouble may occur.

If “Ink End” is displayed, the printing operation stops.

If “Ink End” is displayed, you cannot print until inserting the new ink cartridge.

If there is no cartridge for replacement at hand, leave the empty ink cartridge inserted in
the printer. Leaving the printer with the ink cartridge removed may result in clogging of
the print head.
General remark

For part numbers of consumables and inks, consult the Océ MediaGuide
http://www.mediaguide.oce.com