Oce CS9350, Manual

Page: 171 / 194

CS9350 User’s Guide
6-171
6.3 Disposal of waste fluids
(1) Disposal timing
Dispose of waste fluids in the following cases:
a. When the waste fluid tank is more than half full.
b. When “Waste Ink Tank Full” is displayed on the operation panel.
(2) Disposal method
WARNING

The waste fluid from the printer falls under the category of waste oil (waste ink) of
industrial waste (out of the 19 items of general waste from business activities).
You are obligated to properly dispose of waste fluid in compliance with Wastes Disposal
and Public Cleansing Act and local ordinances.
Delegate disposal to an industrial waste disposal contractor.
Step 1:
Ready an empty container such as a supply waste fluid bottle, to contain the waste fluid.
Step 2:
Lay a protective material on the floor under the waste fluid tank.
Step 3:
Open the waste fluid valve, and transfer the waste fluid to the container.
NOTE

When transferring the waste fluid to the empty container, the waste fluid may spatter.
Make sure to put the container close to the waste fluid valve.
N° Name
1 Waste fluid valve
2 Empty container
1
2