Oce CS9350, Manual

Page: 40 / 194

CS9350 User’s Guide
3-40
• Start performing Test Print for the selected item.
TIP

Refer to the following for details on each of the print list items.
3.5.1 Nozzle check to 3.5.3 Setup print
Step 6:
Repeat step 4 to step 5 when performing test print for other items.
Step 7:
Press the [Cancel] key on the operation panel to exit from test print.
• The operation panel returns to Normal.
• The procedure for test printing is complete.
3.3.1 Nozzle check
NOTE

If the nozzle check result indicates that the checked points are blurred or missing, clean
the head.
6.2.3 Head cleaning
Perform the nozzle check once again at the end of the work.
TIP

Refer to the following for printing procedure. 3.5 Test print