Oce CS9350, Manual

Page: 112 / 194

CS9350 OPERATION MANUAL
5-112
(2) Init.Adj.Change menu
Sets up Initial Adjust Change.
(3) Confirm Print menu
Performs Confirm Print.
(4) Micro Print menu
Performs Micro Adjustment Print.
Setup item Setting Description
Init. The set value ±50.0mm in
“Feed length” of Initial adjust
print Sets up Initial Adjust Change.
e.g) When the set value in “Feed length*” of Initial adjust
print is set to 250mm, the adjustment range in this menu is
200mm to 300mm.
— •[Enter] key: saves the setting and shifts to the previous menu.
•[Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.1.1.4 Dist.Adj menu
Setup item Setting Description
FeedLength 100mm to <250mm> to
500mm Changes the length (feed length) of the media feed direction
for Confirm Print.
•[Enter] key:
Determines the setting.
“Printing” is displayed on the operation panel and Initial
Print starts.
After printing, the printer enters Normal.
— •[Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.1.1.4 Dist.Adj menu
Setup item Setting Description
Micro Print Printing Prints the following PF pattern (micro adjustment) with a
focus on the micro adjustment value.
•0%, ±0.05%, ±0.1%, ±0.2%
— •[Cancel] key: shifts to the previous menu.
Stops printing and returns to the previous menu if printing
is in progress.
5.1 Setup menu