Oce CS9350, Manual

Page: 119 / 194

CS9350 OPERATION MANUAL
5-119
5.1.4 Media Initial menu
Sets whether to detect the media width and edge while initializing the media.
NOTE

Set the media width that is set in the Media Width menu when setting “Off” in the Media
detection menu.
5.1.5 Media Width menu

When the Media detection menu is set to “Off”, the media cannot be cut automatically.
5.1.5 Media Width menu
Specifies the media width between 7mm away from the right edge of the platen and the left end if media
detection is not performed during media initialization.
(1) Media Width menu
Displays the detected media width if media detection is performed during media initialization.
(2) MediaWidth menu
NOTE

If the media is loaded as shown in the illustration and media detection is not performed,
the printing may be performed between the right edge of the platen and the media.
5.1.8 Origin menu
Setup item Setting Description
Init. Off The media is not detected.
Top & Width Detect the media width and edge while initializing the media.
<Width> Detect the media width while initializing the media.
— •[Enter] key: saves the setting and shifts to the previous menu.
•[Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu
N° Name
1 Roll media
2 Media width (when not detected)
1
2
7mm