Oce CS9350, Manual

Page: 21 / 194

CS9350 User’s Guide
2-21
2.2.2 Rear section
8 Platen Installed inside of the front cover. Stabilizes the print side of the media.
9 Maintenance cover Used to prevent the user from touching the inner mechanical section.
Open and close in the following cases.
•When cleaning the cleaning wiper
•When cleaning around the print head.
•When replacing the cutter
It is normally closed.
10 Connector Used to install spectrophotometer.
N° Name Function
1 AC inlet Used for connecting the power cable.
2 Network interface cable
connector Connects a network interface cable.
3 Scroller holder Set the scroller here when using the roll media.
4 Media feed slot Used for feeding media.
5 Ink cartridge slot Insert the ink cartridge.
6 Media guide Used for feeding media smoothly when the media is set or printed.
7 Waste fluid tank Used for collecting waste ink discharged from the printer.
N° Name Function
9