Oce CS9350, Manual

Page: 125 / 194

CS9350 OPERATION MANUAL
5-125
5.1.13 Strike Wait menu
Sets up the waiting time while overwrite printing.
NOTE

When using the media with a narrow width, the media cannot be warmed up adequately,
therefore the print quality may not be preserved.
In such a case, set up the Strike Wait time while overwrite printing to warm up the media
adequately before printing.
5.1.14 Slant Check menu
Sets up slanting detection during media loading.
Setup item Setting Description
Strike Wait <0.0 sec.> to 0.1 sec. to 5.0
sec. Sets the overwrite wait time.
— •[Enter] key: saves the setting and shifts to the previous menu.
•[Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu
Setup item Setting Description
Slant Check Off Slant Check is not performed.
<On> Slant Check is performed.
— •[Enter] key: saves the setting and shifts to the previous menu.
•[Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu