Oce CS9350, Manual

Page: 27 / 194

CS9350 User’s Guide
3-27
Chapter 3 Before using
3.1 Turning the power ON/OFF
3.1.1 Turning the power ON
Step 1:
Press the [Power] key on the operation panel to turn ON the printer.
• Power lamp on the operation panel turns on (blue).
• The printer starts initial operation.
• When the initial operation is complete, the printer enters Normal.
NOTE

If there is a problem during the initial operation, a message is displayed on the operation
panel and the printer may stop operating.
If operation stops, refer to “7 Troubleshooting” and deal with the problem.
3.1.2 Turning the power OFF
Step 1:
Verify the following regarding the operational condition of the product.

Printing or other operations are not in progress.

The operation panel display is Normal.

The Low lamp on the operation panel lights up in green.
NOTE

If the High lamp on the operation panel lights up in green, the head height is set to High.
Return the head height to Low before turning the power OFF.
4.2.5.2 When returning the print head to the original position