Oce CS9350, Manual

Page: 182 / 194

CS9350 User’s Guide
7-182
(2) The printing position is incorrect (some parts of the media cannot be printed
on)
(3) Printing is blurred
(4) White or black lines appear on printed media
N° Possible cause Remedy Reference
1 Is the loading position of the media correct? Set the media correctly.
3.4 Loading
media
2 Did you set up the origin and print position? Cancel or reset the settings of the origin and
print position.
5 Panel setup
menu
N° Possible cause Remedy Reference
1 Are you using the recommended media? Use the recommended media.
4.2.1 Media type
2 Are you using the thick or thin media? Use the recommended media.
4.2.1 Media type
3 Is the media printed on the printing surface? Confirm the printing surface of the media and
set it correctly.
3.4 Loading
media
4 Did you perform Alignment? Perform Alignment.
3.6 Adjust Print
5 Did you perform Media feed compensation? Perform Media feed compensation.
4.2.6 Media feed
compensation
6 Is the temperature setting of each heater
appropriate? Set the temperature appropriately.
5.1.1.1.5 Pre-
heater menu to
5.1.1.1.7 Dryer menu
7 Is the head height set to High? Return the head height to “Low”.
4.2.5 Head
height adjustment
N° Possible cause Remedy Reference
1 Are you using the recommended media? Use the recommended media.
4.2.1 Media type
2 Is the scroller set correctly? Set the scroller correctly.
3.4.1 Loading
roll media
3 Is the nozzle in good condition? Perform Head cleaning.
6.2.3 Head
cleaning
4 Did you perform Alignment? Perform Alignment.
3.6 Adjust Print
5 Did you perform Media feed compensation? Perform Media feed compensation.
4.2.6 Media feed
compensation
6 Is the temperature setting of each heater
appropriate? Set the temperature appropriately.
5.1.1.1.5 Pre-
heater menu to
5.1.1.1.7 Dryer menu
7 Is the head height set to High? Return the head height to “Low”.
4.2.5 Head
height adjustment