Oce CS9350, Manual

Page: 121 / 194

CS9350 OPERATION MANUAL
5-121
Ink Drying Time Menu
This menu is used to set ink drying time.
5.1.7 Method of Cut menu
Sets the media cutting operation after printing.
NOTE

Some media may not be cut (cannot be cut at all or cannot be cut finely). In such a case,
set the “Output Mode menu” to “Off” and cut the media manually.

5.1.6 Output Mode menu
Setup Item Setting Description
Ink drying time <0sec> to 60min Set the ink drying time.
— •[Enter] key: Saves the set value and shifts to the previous
menu.
•[Cancel] key: Cancels the setting and shifts to the previous
menu.
5.1.6 Output Mode menu
Setup item Setting Description
Cutting methods SingleCut-2 steps Cuts at a shorter process than SingleCut-3 steps method.
Suitable for media with a narrow width.
<SingleCut-3 steps> Normal cutting method.
DoubleCut-2 steps Set when the media is not cut with SingleCut-2 steps method.
Suitable for media with a narrow width.
DoubleCut-3 steps Set when the media is not cut with SingleCut-3 steps method.
— •[Enter] key: saves the setting and shifts to the previous menu.
•[Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu