Oce CS9350, Manual

Page: 88 / 194

CS9350 User’s Guide
4-88
Settings that can be changed or confirmed while printing
NOTE

When you change a setting during operation, be sure to select “Backup” to save the
setting that you changed.
If the printer returns to Normal without “Backup” being selected, the changed setting is
not saved.
4.3.6 Pausing printing
NOTE

If the printing is paused, the print quality will not be guaranteed.
Step 1:
Check that the printer is in operating.
Step 2:
Press the [Pause] key on the operation panel.
• The printer pauses printing.
• “Print Restart -> ENTER” is displayed on the operation panel.
Setup item Setting Description
Temperature Pre Checks the current temperature of the pre-heater.
Platen Checks the current temperature of the platen heater.
Dryer Checks the current temperature of the dryer.
Pre heater Off / 30 °C to 50 °C Changes the temperature of the pre-heater.
Platen heater Off / 30 °C to 50 °C Changes the temperature of the platen heater.
Dryer Off / 30 °C to 50 °C Changes the temperature of the dryer.
PF Adjust -5.00%~0.00~5.00% Change the feed adjustment value.
Backup — •[Enter] key: Save the changed setting.
— •[Cancel] key: The printer returns to Normal.