Oce CS9350, Manual

Page: 54 / 194

CS9350 User’s Guide
3-54
NOTE

Perform rough adjustment first when the amount of misalignment cannot be judged.
Step 3:
Print the confirmation pattern and check if the printer is adjusted properly.
3.6.2.1 Custom Confirmation Pattern
Step 4: If the printer is not adjusted, go back to Step 2.
NOTE

When you are not satisfied with the result of rough adjustment, perform micro
adjustment.

For Micro Adjustment Pattern, select “Adjust pattern ALL” to adjust all patterns or “Each
Adjust pattern” to adjust patterns A to F separately.
3.6.2.3.1 Adj. PatternALL
3.6.2.3.2 Each Adjust Patterns
Custom Confirmation Pattern
From this menu, you can print all confirmation patterns A to F to check the amount of misalignment.
Step 1:
Turn ON the printer and load the roll media.
3.4.2 Setting Roll Media
Step 2: Display the Adjust Print menu on the operation panel.
a. Press the [Menu] key on the operation panel.
• “Menu1: Setup>” is displayed on the operation panel.
• The operation panel shifts to the Setup menu display.