Oce CS9350, Manual

Page: 51 / 194

CS9350 User’s Guide
3-51
Standard Micro Adjustment Pattern
Check the confirmation pattern, and when the misalignment is small, perform micro adjustment.
Print a micro adjustment pattern and register the setting value.
Step 1:
Display the Adjust Print menu on the operation panel in the same way as in step 2 of “3.6.1.1
Standard Confirmation Pattern”
Step 2:
Press the [+] key or [-] key to select “Adj.3: Fine Pattern”.
Step 3:
Press the [Enter] key on the operation panel.
• “Warming Up”, and then “Warming Up Skip -> E” are displayed.
NOTE

To start printing during warming up, press the [Enter] key while “Warming Up Skip -> E” is
displayed.
4.4.7 Start Printing during Warm up
• A confirmation pattern for print quality adjustment is printed after warming up.
• Regarding adjust print patterns, the same patterns are printed on both edges and the centre of the
paper.