Oce CS9350, Manual

Page: 49 / 194

CS9350 User’s Guide
3-49
Step 3:
Press the [Enter] key on the operation panel.
• The printer starts printing a rough adjustment pattern.
• The pattern images are printed on both paper edges and the centre of the media.
Step 4:
Check the both ends and the centre of the print result that printed with Adjust pattern, and
select the number from 1 to 11 that is not out of alignment.
• “4” is selected in the next printing sample.
NOTE
Note
•“6” is the current setting value.
Step 5:
“Pattern *: 6" (* indicates a pattern name as shown below) is displayed on the operation
panel.
• The pattern name (*) differs depending on the set print mode.
The print modes and their pattern names are as follows.
PrintMode PatternName
Quality 1, 2 C
Quality 3, 4 B
Graphics 1, 2 E
Graphics 3, 4 D
Banner 1, 2 A
Banner 3, 4 A