Oce CS9350, Manual

Page: 63 / 194

CS9350 User’s Guide
3-63
NOTE

To start printing during warming up, press the [Enter] key while “Warming Up Skip -> E” is
displayed.
4.4.7 Start Printing during Warm up
• An Adjust print pattern for print quality adjustment is printed after warming up.
Six micro adjustment patterns will be printed. Input setting value for each pattern.
• Regarding adjust print patterns, the same patterns are printed repeatedly on both edges and the
centre of the paper.
Step 4:
Check the both ends and the centre of the print result that printed with Adjust pattern, and
select the number from 1 to 7 that is not out of alignment.
• “3” is selected in the next printing sample of “Micro Adjustment Pattern A”.
• “5” is selected in the next printing sample of “Micro Adjustment Pattern B”.
• “6” is selected in the next printing sample of “Micro Adjustment Pattern F”.