Oce CS9350, Manual

Page: 181 / 194

CS9350 User’s Guide
7-181
(4) Media jams frequently occur
NOTE

If media other than the recommended one is used, correct media feeding cannot be
assured.
(5) The media veers during printing
7.1.4 Printing-related troubleshooting
(1) Printing is partially stained or incomplete
NOTE

Proper print quality may not be obtained with the media other than the recommended one.
N° Possible cause Remedy Reference
1 Are you using the recommended media? Use the recommended media.
4.2.1 Media type
2 Is the media used in an environment other
than the one specified? Use the media in a dedicated environment.
4.2.2 Cautions
on handling media
3 Are you using the old media? Replace it with new media.
6.1.2 Replacing
Roll Media
4 Are you using the folded or wrinkled media?
5 Does the media bend? Use the recommended media.
When using media other than the dedicated
one, set the Vacuum Fan menu.
4.2.1 Media type
5.1.1.1.8
Vacuum Fan menu
N° Possible cause Remedy Reference
1 Are you using the recommended media? Use the recommended media.
4.2.1 Media type
2 Is the loading position of the media correct? Set the media correctly.
3.4 Loading
media
3 Is the scroller set correctly? Set the scroller correctly.
3.4.1 Loading
roll media
N° Possible cause Remedy Reference
1 Does the media include moisture? Replace it with new media.
6.1.2 Replacing
Roll Media
2 Are you using the folded or wrinkled media?
3 Does the media bend? Use the recommended media.
When using media other than the dedicated
one, set the Vacuum Fan menu.
4.2.1 Media type
5.1.1.1.8
Vacuum Fan menu