Oce CS9350, Manual

Page: 77 / 194

CS9350 User’s Guide
4-77
TIP

The length of media that is fed (feeding length) for Initial Print is normally set at 250 mm.

If you increase the feeding length, the accuracy of the Media feed compensation
improves.
To change the feeding length, press the [+] key or [-] key on the operation panel and
change the set value.
b. Press the [Enter] key on the operation panel.
• “Printing” is displayed on the operation panel.
• Starts Initial Print.
• When the Initial Print is complete, the printer enters Normal.
c. After the Initial Print, the media is cut.
4.4.3 Cutting media
Step 3: Measure the distance between the two pluses in the Initial Print using a ruler.
Step 4: Sets up Initial Adjust Change.
a. Press the [+] key or [–] key on the operation panel to select “PF2: Initial Change”.
b. Press the [Enter] key on the operation panel.
• “Init.: 250.0/250 mm” is displayed on the operation panel.
c. Press the [+] key or [-] key on the operation panel and enter the measured value in step 3.
d. Press the [Enter] key on the operation panel.
• The initial adjustment value is saved.
• “PF2: Initial Change” is displayed on the operation panel.
Step 5:
Performs Confirm Print.
N° Name
1 Feed length
2 Media feeding direction
2
1 1