NR Electric PCS-9611, Instruction Manual

Page: 20 / 300

2 Technical Data
PCS-9611 Feeder Relay
2-4
Date: 2014-04-08
2.1.4.5 Ethernet Port for Debugging
Medium Parameters
Electrical Ethernet
(in front panel)
Port number 1
Connector type RJ-45
Transmission rate 100Mbits/s
Transmission standard 100Base-TX
Transmission distance < 100m
Safety le vel Isolation to ELV level
2.1.4.6 Process Level Interface
Medium Parameters
Optical Ethernet
Optical fiber material Glass fiber
Optical fiber type Multi-mode
Connector type LC ST
Wavelength 1310nm 820nm
Transmission dis tance < 2000m
Minimum transmission power -20dBm
Reception sensitivity -30dBm
2.1.5 Type Test
2.1.5.1 Environmental Tests
Dry cold test IEC60068-2-1: 2007, 16h at -25°C
Dry heat test IEC60068-2-2: 2007, 16h at +55°C
Damp heat test IEC60068-2-78: 2001, 10 days , 93%RH, +55°C
Cyclic temperature with
humidity test
IEC60068-2-30: 2005, six (12+12hours) cycles, 95%RH,
low tempe25°C, high tempe55°C
2.1.5.2 Electrical Tests
Dielectric test IEC60255-27: 2005, test voltage: 2kV, 50Hz, 1min
Impulse voltage test
IEC60255-5: 2000, test voltage: 5kV, unipolar impulses
, waveform 1.2/50μs,
source energy 0.5J
Overvoltage category IEC60255-5: 2000, Class III
Insulation measurement IEC60255-5:
2000, insulation resistance >100MΩ @ 500Vdc
Pollution degree IEC60225-1: 2009, Class II
2.1.5.3 Electromagnetic Compatibility
1MHz burst disturbance tests
- Common mode
- Differential mode
IEC60255-22-1: 2007, Class III
2.5kV
1.0kV
Electrostatic discharge tests
- For contact discharge
- For air discharge
IEC60255-22-2: 2008, Class IV
8.0kV
15.0kV