NR Electric PCS-9611, Instruction Manual

Page: 257 / 300

10 Communication
PCS-9611 Feeder Relay
10-23
Date: 2014-04-08
T: Logical Nodes For Switchgear
TCTR : Current transformer YES
TVTR : Voltage transformer YES
Y: Logical Nodes For Power Transformers
YEFN : Earth fault neutralizer (Peterson coil)
－
YLTC : Tap changer
－
YPSH : Power shunt
－
YPTR : Power transformer YES
Z: Logical Nodes For Further Power System Equipment
ZAXN : Auxiliary network
－
ZBAT : Battery
－
ZBSH : Bushing
－
ZCAB : Power cable
－
ZCAP : Capacitor bank
－
ZCON : Converter
－
ZGEN : Generator
－
ZGIL : Gas insulated line
－
ZLIN : Power overhead line
－
ZMOT : Motor
－
ZREA : Reactor
－
ZRRC : Rotating reactive component
－
ZSAR : Surge arrestor
－
ZTCF : Th yristor controlled frequency converter
－
ZTRC : Thyristor controlled reactive component
－
10.5 DNP3.0 Interface
10.5.1 Overview
The descriptions given here are intended to accompany this relay. The DNP3.0 protocol is not
described here; please refer to the DNP3.0 protocol standard for the details about the DNP3.0
implementation. This manual only specifies which objects, variations and qualifiers are supported
in this relay, and also specifies what data is available from this relay via DNP3.0.
The relay operates as a DNP3.0 slave and supports subset level 2 of the protocol, plus some of
the features from level 3. The DNP3.0 communication uses the Ethernet ports at the rear side of
this relay. The Ethernet ports are optional: electrical or optical.
10.5.2 Link Layer Functions
Please see the DNP3.0 protocol standard for the details about the linker layer functions.
10.5.3 Transport Functions
Please see the DNP3.0 protocol standard for the details about the transport functions.