NR Electric PCS-9611, Instruction Manual

Page: 203 / 300

8 Human Machine Interface
PCS-9611 Feeder Relay
8-23
Date: 2014-04-08
3. Press key
“▲” or “▼” to locate the cursor on the submenu “
Trig Oscillogram
” and press key
“
ENT
” to trigger an oscillogram.
8.2.8.3 Clear Statistic Counter
The submenu
“
Clear Counter
” is used to clear the statistic information (auto-recloser operation
number, optical channel communication statistic information etc.).
Operating steps:
1. Press key
“▲” to enter the main menu in the default displaying situation.
2. Press key
“▲” or “▼” to locate the cursor on the submenu “
Local Cmd
” and press key “
ENT
”
to enter this submenu.
3. Press key
“▲” or “▼” to locate the cursor on the submenu “
Clear Counter
” and press key
“
ENT
” to clear the statistic information. The information “Clear Statistic Data…” is shown on
the LCD.
The operation steps of the submenu
“
Clear Interlock File
” and “
Clear Energy Counter
” are
similar with the operation steps of the submenu
“
Clear Counter
”.
8.2.8.4 Control CB through Local HM I
The submenu
“
Control
” is used to control the circuit breaker through the local HMI of this relay.
There are 5 groups of control elements in this relay. Anyone of them can be used to control
(tripping or closing) a circuit breaker or a disconnector.
Operating steps:
1. Press key
“▲” to enter the main menu in the default displaying situation.
2. Press key
“▲” or “▼” to locate the cursor on the submenu “
Local Cmd
” and press key “
ENT
”
to enter this submenu.
3. Press key
“▲” or “▼” to locate the cursor on the submenu “
Control
” and press key “
ENT
” to
show the password input interface.
4. Input correct password and then press key
“
ENT
” to show the control item selection interface.
5. Press key
“▲” or “▼” to select an expected control element and then press key “
ENT
” to show
the password input interface.
6. Press key
“
+
”, “
-
”, “◄” and “►” to enter the correct password and then enter the control object
selection interface, and then press key
“▲” or “▼” to select a control object.
7. Press key
“
ENT
” to enter control command selection interface, and then press key “▲” or “▼”
to select a control command.
8. Press key
“
ENT
” to enter control check condition selection interface, and then press key “▲”
or
“▼” to select a control check condition.
9. Press key
“
ENT
” to enter control interlock selection interface, and then press key “▲” or “▼”