NR Electric PCS-9611, Instruction Manual

Page: 140 / 300

6 Hardware
PCS-9611 Feeder Relay
6-18
Date: 2014-04-08
10 BI_07 The No.7 programmable binary input.
11 BI_08 The No.8 programmable binary input.
12 BI_Opto4- The common negative connection of the BI_07 and BI_08.
13 BI_09 The No.9 programmable binary input.
14 BI_10 The No.10 programmable binary input.
15 BI_Opto5- The common negative connection of the BI_09 and BI_10.
16 BI_11 The No.11 programmable binary input.
17 BI_12 The No.12 programmable binary input.
18 BI_Opto6- The common negative connection of the BI_11 and BI_12.
19 BI_13 The No.13 programmable binary input.
20 BI_14 The No.14 programmable binary input.
21 BI_Opto7- The common negative connection of the BI_13 and BI_14.
22 Not used
6.9 Network DSP Module (NR4126)
The network DSP module is applied in a digitalized substation for receiving or transmitting the
GOOSE information. This module provides 2 optical Ethernet ports only with GOOSE protocol.
The view of the network DSP module is shown in Figure 6.9-1 .
NR4126D
NR4126
1 2
3 4
TX
TX
RX
RX
Figure 6.9-1 View of the network DSP module
6.10 Analog Output Module (NR4411)
The analog output module contains four 4~20mA or 0~10V DC analog output channels for
outputting the metering values (such as current, active power etc.) of this relay to the monitoring
and control system (such as DCS).
The output type (4~20mA or 0~10V) and the corresponding maximum value of each analog output