Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2, Administration Manual

Page: 262 / 684

262 Novell ZENworks 7.3 Linux Management Administration Guide
no
vd
ocx
(e
n)
7 Ja
nua
ry 201
0
The following bundle reports are provided with ZENworks Linux Management:
Š
Bundle Reports: This folder contains the following reports:
Š
Bundle Delivery Failures
Š
Bundle Delivery in the Past 24 Hours
Š
Bundle Delivery Information Per Device
Š
Last Bundle Delivery Per Device
Š
Dell Reports: This folder contains the following reports:
Š
Devices Not Having Valid Dell Update Package Bundles <Template>
Š
Devices Not Having Valid RPM Package Bundles <Template>
Š
Installed Dell Applications Per All Devices
Š
Installed Dell Applications Per PowerEdge Model
Š
Device Reports: This folder contains the following reports:
Š
Device Errors in the Past 24 Hours
Š
Device Errors in the Past Week
Š
Devices Disk Usage
Š
Devices Inactive for the Past 90 Days
Š
Devices Registered in the Past 24 Hours
Š
Devices Registered in the Past Week
For more information, see Part X, “Reports,” on page 531 .
20.16 Best Practices for Adding Packages to
Bundles
Š
To add multiple packages to a bundle, use
zlman
.
For more information on zlman, see zlman (1) (page 562) .
Š
To create several bundles with multiple packages, create one bundle at a time and add multiple
packages to it, instead of running the commands at the same time. For example, if you want to
create three bundles with 100 packages each, run the
zlman
commands in sequence, instead of
executing them from three shells simultaneously.
Š
To assign a large number of bundles to managed devices at one time, create a bundle group in
ZENworks Control Center and assign it to the managed devices. For example, if you want to
assign YOU patches to a server, create a bundle group with all of the YOU patches, and assign
the bundle group to the server instead of assigning the YOU patches individually to the server.
Assigning patches individually would take a long time and might not be completed if done
from ZENworks Control Center.
For more information on bundle groups, see
Section 20.8, “Creating Bundle Groups,” on
page 247 .
Š To quickly deploy large package sets, adjust the level of security provided by the connection
between the managed device and the ZENworks Server. To change the security level:
1. On the ZENworks Server, open the
/etc/opt/novell/zenworks/tomcat/base/
server.xml
file.