Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2, Administration Manual

Page: 475 / 684

Imaging Utilities and Components 475
no
vd
ocx
(e
n)
7 Ja
nua
ry 201
0
4 Click File > Save As , then specify the filename of the add-on image, including the
.zmg
filename extension.
31.8 Modifying Image Content
You can modify the content of an image file in the following ways:
Š
Section 31.8.1, “Adding Directories and Files,” on page 475
Š Section 31.8.2, “Creating a New Directory,” on page 475
Š
Section 31.8.3, “Creating a New Partition,” on page 476
Š Section 31.8.4, “Resizing a Partition,” on page 476
31.8.1 Adding Directories and Files
To add directories and files to the open image:
1 Click File > Open .
2 Browse for and select the image file.
Large image files might take a few moments to open.
3
Do any of the following to add content:
Š
Browse for the directories and files you want the add-on image to contain, then drag or
copy the directories and files into the right pane from your file browser.
Š
Click Image > Add Files and select the files to be added.
Š
Click Image > Add Directory and select the directories to be added.
Š
Click the Add Directory icon and select the directories to be added.
Š
Click the Add File icon and select the files to be added.
4 Brows for and select the files or directory, then click Add or OK .
You can select multiple files using the Shift and Ctrl keys.
5 Repeat these steps as necessary.
31.8.2 Creating a New Directory
To create a directory in the open image:
1 Click File > Open .
2 Browse for and select the image file.
Large image files might take a few moments to open.
3 Browse for the partition or directory in the left pane where you want to create the directory,
then click
Image > Create Directory .
You can also click the New Directory icon.
4 Specify the name of the directory, then click OK .