Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2, Administration Manual, Page: 49 / 684

ZENworks Server 49
no
vd
ocx
(e
n)
7 Ja
nua
ry 201
0
/opt/novell/zenworks/bin/zlm-config --start
To ensure that all services start in the correct order, we recommend that you use the
zlm-config -
-start
option to start all services rather than starting them one at a time.
5.1.3 Stopping a ZENworks Service
To stop a service, use the following command:
/etc/init.d/ servicename stop
Replace servicename with the name of the service as listed in Table 5-1 on page 47 .
To stop all services, use the following command:
/opt/novell/zenworks/bin/zlm-config --stop
5.1.4 Restarting a ZENworks Service
To restart a service that is already running, use the following command:
/etc/init.d/ servicename restart
Replace servicename with the name of the service as listed in Table 5-1 on page 47 .
To restart all services, use the following command:
/opt/novell/zenworks/bin/zlm-config --restart
To ensure that all services start in the correct order, we recommend that you use the
zlm-config -
-restart
option to restart all services rather than restarting only one service.
5.2 RPM Package Repository
The ZENworks Server contains all of the RPM packages and Dell Update Packages that are
included in bundles defined within your Management Zone.
The following sections contain more information:
Š Section 5.2.1, “Package Repository Location,” on page 49
Š
Section 5.2.2, “Package Replication,” on page 50
Š Section 5.2.3, “Package Administration,” on page 50
5.2.1 Package Repository Location
The package repository is the
/var/opt/novell/zenworks/pkg-repo
directory on the ZENworks
Server. When you add an RPM package to a bundle, the package is automatically uploaded to the
package repository. When you mirror Dell Update Packages, the packages are automatically
bundled and uploaded to the package repository.