Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 Administration Manual Download Page 622

Page: 622 / 684

622

Novell ZENworks 7.3 Linux Management Administration Guide

ocx

7 Ja
nua
ry 201

The following Linux daemons run the imaging server processes:

“novell-pbserv” on page 622

“novell-proxydhcp” on page 623

“novell-tftp” on page 625

“novell-zmgprebootpolicy” on page 627

“Understanding Script Arguments” on page 629

novell-pbserv

The novell-pbserv daemon provides imaging services to devices.

This daemon is started automatically when installing ZENworks Linux Management, or when
rebooting the server.

“Understanding the novell-pbserv Components” on page 622

“Configuring novell-pbserv” on page 622

Understanding the novell-pbserv Components

To initiate the novell-pbserv daemon, enter the following command on the Linux command line in a
terminal program:

/etc/init.d/novell-pbserv

Table D-5

lists the arguments for this command, the executable it starts, and the configuration file it

uses:

Table D-5

Novell-pbserv Command Details

Configuring novell-pbserv

The novell-pbserv configuration file (

novell-pbserv.conf

), contains the following parameters:

Table D-6

Novell-pbserv Parameters

Script Arguments:

start, stop, restart, force-reload, status, showpid (for descriptions of these
arguments, see

“Understanding Script Arguments” on page 629

)

Executable:

/opt/novell/zenworks/preboot/bin/novell-pbservd

Configuration File:

/etc/opt/novell/zenworks/preboot/novell-pbserv.conf

Parameter

Description

EnableLogging=YES

If YES, a log file is created for debug messages. This is the default.

If NO, no log file is created for debug messages.

The

novell-pbserv.log

file is created in the

/var/opt/novell/log/

zenworks/preboot

directory.

Summary of Contents for ZENWORKS LINUX MANAGEMENT 7.3 IR2













































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ZENWORKS LINUX MANAGEMENT 7.3 IR2

Reviews:

Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2, Administration Manual, Page: 622 / 684

Search results

Summary of Contents for ZENWORKS LINUX MANAGEMENT 7.3 IR2

Reviews: