Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 Administration Manual Download Page 523

Page: 523 / 684

Message Logger

523

ocx

7 Ja
nua
ry 201

</logger>

where

component name

can be DataModelModule, QueueRunner, Sender,

ZLMCleanupDevice, SettingsRefreshModule, etc.

3. Restart all the zlm services by using the

zlm-config --restart

command.

ZENworks Agent (zmd) Logs:

The ZENworks Agent (zmd) logs are in the

zmd-

messages.log

and

zmd-backend.log

files. On SLES 11 devices, the backend logs are in the

zmd-satbackend.log

file. For more information, view the zmd man page (

man zmd

) on a

managed device or see

zmd (8) (page 548)

Install and Uninstall Logs:

The installation and uninstallation of the ZENworks Server and

Agent are logged in the

zlm-install.log

and

zlm-uninstall.log

files.

Summary of Contents for ZENWORKS LINUX MANAGEMENT 7.3 IR2













































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ZENWORKS LINUX MANAGEMENT 7.3 IR2

Reviews:

Related manuals for ZENWORKS LINUX MANAGEMENT 7.3 IR2

Brands by name

Popular brands

Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2, Administration Manual

Search results

Summary of Contents for ZENWORKS LINUX MANAGEMENT 7.3 IR2

Reviews:

Related manuals for ZENWORKS LINUX MANAGEMENT 7.3 IR2

Brands by name

Popular brands