Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2, Administration Manual, Page: 395 / 684

Setting Up Preboot Services 395
no
vd
ocx
(e
n)
7 Ja
nua
ry 201
0
The
/svr/tftp/z_auto.cfg
file may not contain the same information as
/svr/tftp/
z_auto65.cfg
, so that when you rename it with the
65
, it might have different content than the
file used for ZENworks 6.5 servers. Therefore, for ZENworks 7.3 do not simply copy the
z_auto65.cfg
file instead of renaming the
z_auto.cfg
file.
No files need to be copied for servers running the following ZENworks versions:
ZENworks 7 (running on a Linux server)
ZENworks 7 Linux Management
29.4.6 Configuring Intel Active Management Technology (AMT)
To set up global Intel AMT enterprise names:
Š
“Downloading and Installing the iAMT Redirection Drivers” on page 395
Š
“Provisioning the AMT Devices” on page 396
Š
“Setting Up the Global Intel AMT Enterprise Names” on page 398
Downloading and Installing the iAMT Redirection Drivers
After a device has had its AMT resources provisioned, those resources can be accessed locally by
the ZENworks implementation of AMT. However, before you can provision a device’s resources,
you need to install the iAMT Redirection Drivers from Intel. You can do this on one device, then
send the result to the other devices that need the drivers, as outlined in the steps below.
The following are required to be installed and operational on the device where you initially install
the drivers:
Š
The Linux kernel source
Š
GCC (gnu c compiler)
To download and install the device drivers:
1 In a Web browser, access Intel(R) PRO/10/100/1000/10GbE Drivers (http://sourceforge.net/
projects/e1000/) on the SourceForge Web site.
2 Click the green Download Intel(R) PRO/10/100/1000/10GbE Drivers option.
3
In the Latest File Releases section, select the iAMT Redirection Drivers option.
4 Click the green Download option.
5 In the Filename column under iAMT Redirection Drivers , click the iamt-1.1.8.tar.gz option (or
later version) and save the file to a location on your network.
6 Unzip the
.tar.gz
file and decompress the
iamt-1.1.8.tar
(or later version) file.
7 To install the drivers, follow the instructions contained in the
Readme
file that is contained in
the
.tar
file.
This creates binaries of the drivers.
ZENworks 7 (running on a
NetWare or Windows server) /svr/tftp/z_auto.cfg
/svr/tftp/pxelinux.0
Copy both of the files, but
rename
z_auto.cfg
to
z_auto65.cfg .
ZENworks Version Files to Copy Action